Accusplit AE790M500 Watch User Manual


 
This is only a brief description of these buttons. Detailed uses of the buttons are different in particular functions
and will be described later in the instructions.
Pressing [MODE] button will toggle among the modes above. Note that there is no auto-return function in the
stopwatch. Whenever you change modes, the stopwatch will remain in that mode until the [MODE] button is
pressed again
Each time you enter a mode, a message will be displayed for a second before you enter the mode:
Note:- In the following descriptions, items printed in dark gray stand for flashing digits.
Normal Time Mode
The starting point for operating your stopwatch is NORMAL TIME. If NORMAL TIME is not displayed, press
[Mode] until it is.
Year : - 2001
Date : - January 1
Day of week : - Monday
Time : - 12:00 am
The display format is as below :-
During clock display, press [START] to switch between 12Hr and 24Hr display mode. To toggle chime ON or
OFF, you can press [RESET]. The bell icon will be ON and OFF correspondingly.
Normal Time Setting
Press and hold [RECALL] for 2 seconds to enter setting mode. The normal time setting starts with second. The
second digits will then be flashing. You can change the flashing digit by pressing [START] button. To speed up
the setting you can press and hold [START] for longer than 2 seconds to activate fast setting. To select other
digits, press [RESET] button. The setting order is: Second, Minute, Hour, Year, Month, Date, month-date (m-d)
2 0 0 1
W E 1 - 3
A 1 0 : 3 5' 3 0
year
day, month - date
hr : min second
3