Chapter 33 Command Examples
VES-1616F-3x Series User’s Guide
246
This command shows the general system information (such as the firmware version and
system up time). An example is shown next.
33.2.7 show vdsl-alarmprofile
Syntax:
show vdsl-alarmprofile [<profile-name>]
This command displays a summary list of VDSL alarm profiles or displays the settings of a
VDSL alarm profile. The following example shows the summary table.
The following example shows the settings of the test alarm profile.
33.2.8 show vdsl-profile
Syntax:
show vdsl-profile [<profile-name>]
sysname# show system-information
System Name : VES-1616F-35
System Contact :
System Location :
Ethernet Address : 00:13:49:00:00:02
ZyNOS F/W Version : V3.60(AIH.0)C0 | 01/25/2007
RomRasSize : 3364912
System up Time : 0:28:28 (29b44 ticks)
Bootbase Version : V0.1 | 06/05/2006
ZyNOS CODE : RAS Jan 19 2007 19:22:28
Product Model : VES-1616F-35
sysname#
sysname# show vdsl-alarmprofile
Name LOSs ESs SESs InitFailure Applied Ports
======================================================================
DEFVAL 0 0 0 Off 1-16
sysname#
sysname# show vdsl-alarmprofile test
Profile Name : test
15Mins LOSs Threshold : 15
15Mins ESs Threshold : 10
15Mins SESs Threshold : 5
Initialization Failure : On
sysname#
