Chapter 29 Cluster Management
VES-1616F-3x Series User’s Guide
200
The following table explains some of the FTP parameters.
29.3 Configuring Cluster Management
Click Configuration from the Cluster Management screen to display the next screen.
Refer to Section 29.1 on page 197 for more information.
Figure 104 Clustering Management Configuration
Table 74 FTP Upload to Cluster Member Example
FTP PARAMETER DESCRIPTION
User Enter “admin”.
Password The web configurator password default is 1234.
ls Enter this command to list the name of cluster member switch’s
firmware and configuration file.
360AIH0.bin This is the name of the firmware file you want to upload to the
cluster member switch.
fw-00-13-49-00-00-01 This is the cluster member switch’s firmware name as seen in the
cluster manager switch.
config-00-13-49-00-00-01 This is the cluster member switch’s configuration file name as seen
in the cluster manager switch.
