GS2200-8/24 User’s Guide 66
CHAPTER 8
Basic Setting
8.1 Overview
This chapter describes how to configure the System Info, General Setup, Switch Setup, IP
Setup, Port Setup, and PoE screens.
8.1.1 What You Can Do
•Use the System Info screen (Section 8.2 on page 67) to check the firmware version number.
•Use the General Setup screen (Section 8.3 on page 69) to configure general settings such as
the system name and time.
•Use the Switch Setup screen (Section 8.5 on page 71) to choose your VLAN type, set the ARP
aging time and GARP timers and assign priorities to queues.
•Use the IP Setup screen (Section 8.6.1 on page 73) to configure the Switch IP address, default
gateway device, the default domain name server and the management VLAN ID.
•Use the Port Setup screen (Section 8.7 on page 75) to configure Switch port settings.
•Use the PoE Status screen (Section 8.8 on page 76) to view the current amount of power that
PDs are receiving from the Switch and use the PoE Setup screen (Section 8.8.1 on page 79) to
set the priority levels for the Switch in distributing power to PDs. (These screens are available to
GS2200-8HP and GS2200-24P only.)
