A SERVICE OF

logo

Chapter 35 Access Control
GS2200-8/24 User’s Guide
274
Table 113 SNMP InterfaceTraps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
linkup linkUp 1.3.6.1.6.3.1.1.5.4 This trap is sent when the Ethernet link is
up.
LinkDownEventClear 1.3.6.1.4.1.890.1.5.8.55.27.2.2
1.3.6.1.4.1.890.1.5.8.56.27.2.2
1.3.6.1.4.1.890.1.5.8.59.27.2.2
1.3.6.1.4.1.890.1.5.8.60.27.2.2
This trap is sent when the Ethernet link is
up.
linkdown linkDown 1.3.6.1.6.3.1.1.5.3 This trap is sent when the Ethernet link is
down.
LinkDownEventOn 1.3.6.1.4.1.890.1.5.8.55.27.2.1
1.3.6.1.4.1.890.1.5.8.56.27.2.1
1.3.6.1.4.1.890.1.5.8.59.27.2.1
1.3.6.1.4.1.890.1.5.8.60.27.2.1
This trap is sent when the Ethernet link is
down.
lldp LLDPRemoteTopologyChang
e
1.0.8802.1.1.2.0.0.1 This trap is sent when the LLDP (Link
Layer Discovery Protocol) remote topology
changes.
transceiver-
ddm
DDMIRxPowerEventOn
DDMITemperatureEventOn
DDMITxBiasEventOn
DDMITxPowerEventOn
DDMIVoltageEventOn
1.3.6.1.4.1.890.1.5.8.55.27.2.1
1.3.6.1.4.1.890.1.5.8.56.27.2.1
1.3.6.1.4.1.890.1.5.8.59.27.2.1
1.3.6.1.4.1.890.1.5.8.60.27.2.1
This trap is sent when one of the device
operating parameters (such as transceiver
temperature, laser bias current,
transmitted optical power, received optical
power and transceiver supply voltage) is
above or below a factory set normal
range.
DDMIRxPowerEventClear
DDMITemperatureEventClea
r
DDMITxBiasEventClear
DDMITxPowerEventClear
DDMIVoltageEventClear
1.3.6.1.4.1.890.1.5.8.55.27.2.2
1.3.6.1.4.1.890.1.5.8.56.27.2.2
1.3.6.1.4.1.890.1.5.8.59.27.2.2
1.3.6.1.4.1.890.1.5.8.60.27.2.2
This trap is sent when all device operating
parameters return to the normal operating
range.