ES-3148 User’s Guide
Appendix A 313
APPENDIX A
Product Specifications
These are the switch product specifications.
Table 93 General Product Specifications
Ethernet
Interface
48 10/100 Base-TX interfaces
Auto-negotiation
Auto-MDI/MDIX
Compliant with IEEE 802.3/3u
Back pressure flow control for half duplex
Flow control for full duplex (IEEE 802.3x)
RJ-45 Ethernet cable connector
Gigabit
Interface
2 GbE Dual Personality interfaces (Each interface has one 1000Base-T copper port and one Small
Form-Factor Pluggable (SFP) fiber port, with one port active at a time.)
Bridging 16K MAC addresses
Static MAC address filtering (port lock)
Broadcast storm control
Limited maximum number of MAC addresses per port
Switching Switching fabric: 13.6Gbps, non-blocking
Max. Frame size: 1522 bytes
Forwarding frame: IEEE 802.3, IEEE 802.1q, Ethernet II, PPPoE
Prevent the forwarding of corrupted packets
STP
RSTP
IEEE 802.1d spanning tree protocol
IEEE 802.1w, rapid reconfiguration to recover network failure
Up to 6 STP configurations
QoS IEEE 802.1p
Eight priority queues
Supports RFC 2475 DiffServ, DSCP to IEEE 802.1p priority mapping
Security IEEE 802.1x port-based authentication
Static MAC Address Forward
VLAN Port-based VLAN setting
Tag-based (IEEE 802.1Q) VLAN
Number of VLAN: 4K (256 static VLANs)
Supports GVRP
Protocol based VLAN support
Link
aggregation
Supports IEEE 802.3ad; static and dynamic (LACP) port trunking
Up to six groups and each group can aggregate up to eight ports
Port mirroring All ports support port mirroring
Bandwidth
control
Supports rate limiting at 64Kbps increment
