ES-3148 User’s Guide
254 Chapter 34 Introducing Commands
<index> start-
addr <ip> end-
addr <ip> service
<[telnet] [ftp]
[http] [icmp]
[snmp] [ssh]
[https]>
Specifies a group of trusted
computer(s) from which an
administrator may use a service
to manage the switch.
13
admin-
password
<pw-string>
<confirm-string>
Changes the administrator
password.
14
syslog
Enables syslog logging on the
switch.
13
server <ip-
address>
Enables syslog logging to the
specified syslog server.
13
server <ip-
address>
inactive
Disables syslog logging to the
specified syslog server.
13
level [0 ~ 7]
Sets the IP address of the syslog
server and the severity level.
13
type <type>
facility [local 1
..7]
Sets the log type and the file
location on the syslog server.
13
vlan-
stacking
Enables VLAN stacking on the
switch.
13
<SPTPID>
Sets the SP TPID (Service
Provider Tag Protocol Identifier).
13
default-
management
<in-band|out-of-
band>
Specifies through which traffic
flow the switch is to send packets.
13
ssh known-hosts
<host-ip>
<1024|ssh-
rsa|ssh-dsa>
<key>
Adds a remote host to which the
switch can access using SSH
service.
13
https cert-
regeneration
<rsa|dsa>
Re-generates a certificate. 13
timeout <0-
65535>
Sets the HTTPS timeout period. 13
multi-
login
Enables multi-login. 14
mvr <vlan-
id>
Enters the MVR (Multicast VLAN
Registration) configuration mode.
See Section 34.11.6 on page 260
for more information.
13
dhcp-relay
Enables DHCP relay. 13
helper-address
<svr_ip>
[svr2_ip]
[svr3_ip]
Sets the IP addresses of up to 3
DHCP servers.
13
Table 86 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
