83
ZONE 2/ZONE 3
ADVANCED
OPERATION
Using this unit’s internal amplifier
To use this unit’s internal amplifier, select “Internal” in Zone2 Amplifier 2 (page 67).
You can control the input or adjust the volume level for
Zone 2 and Zone 3 components using ZONE CONTROL
on the front panel.
1 Set REC OUT/ZONE 2 on the front panel to
SOURCE/REMOTE.
2 Press MAIN, ZONE 2 or ZONE 3 to select the
zone you want to change the input for or
adjust the volume level.
Press each button repeatedly to turn the respective
zone on or off.
You can choose from the following modes:
ZONE2 Controls the Zone 2 component
connected to the ZONE 2 AUDIO L/R
jacks on this unit.
ZONE3 Controls the Zone 3 component
connected to the ZONE 3 AUDIO L/R
jacks on this unit.
MAIN Controls the main component
(this unit).
3 Press ZONE CONTROL on the front panel
repeatedly to choose the zone you selected
in step 2.
Each time you press ZONE CONTROL, the front
panel display changes as shown below, and the
indicator for the currently selected zone flashes for
approximately 5 seconds.
y
• You must complete this step within 5 seconds of pressing
ZONE CONTROL on the front panel. Otherwise, the zone
mode selection process is automatically canceled.
In this case, press ZONE CONTROL again.
• The initial setting is “ZONE 2” when both the Zone 2 and
Zone 3 components connected to this unit are turned on.
• If you selected MAIN in step 2, no indicator flashes on the
front panel display when ZONE CONTROL is pressed.
4 Use the INPUT or VOLUME selector on the
front panel to switch the input or adjust the
volume level for the selected zone
component.
y
You must complete this step within 5 seconds of performing
step 2. Otherwise, the zone mode selection process is
automatically canceled. In this case, repeat steps 2 and 3
again.
R
L
+
–
PRESENCE/ ZONE 2
Second room
This unit
Controlling Zone 2/Zone 3 from the
front panel
SOURCE/
REMOTE
REC OUT/ZONE 2
MD/TAPEDVD
DTV
CBL/SAT
VCR 1
CD-R
TUNER
CD
DVR/
VCR 2
MAIN ZONE 2
ZONE ON/OFF
ZONE 3
ZONE CONTROL
ZONE 2
ZONE 3
MAIN
INPUT
VOLUME
or
