A SERVICE OF

logo

32
NOTE
to the programming instructions to correct
the error.
6. Press
RUN
PRGM
.
7. Press
SYSTEM
HEAT/EMER/OFF/
COOL/AUTO
until COOL is displayed.
8. Repeat steps 2 through 5 to check cooling
temperatures.
9. Press
RUN
PRGM
to begin program operation.
YOUR THERMOSTAT IS NOW COMPLETELY
PROGRAMMED AND READY TO AUTOMATI-
CALLY PROVIDE MAXIMUM COMFORT AND
EFFICIENCY!
Press
SYSTEM
HEAT/EMER/OFF/
COOL/AUTO
until OFF is displayed. Reattach
thermostat to subbase. Then press
SYSTEM
HEAT/EMER/OFF/
COOL/AUTO
to
select the operation mode you want (HEAT,
COOL, AUTO).
When you have completed programming, you
may set option switch #3 (see TOTAL KEYPAD
LOCKOUT in the OPERATING FEATURES
section).