Other possible problems and their causes:
PROBLEM
CAUSE
The oven will not
operate
l You have not set the electronic control correctly. Refer to
the section in this manual describing the function you are
operating.
l You have programmed a delayed start time. Wait for the
start time to be reached or cancel and reset the control.
Burner fails to light
l The range is not plugged into a live outlet with the proper
voltage. (See Installation Instructions.)
l You have blown a household fuse or tripped a circuit
breaker. In case of prolonged power failure, manually light
burners (see page 9).
l The burner ports are clogged. Clean with a straight pin
(see pages 34 and 35).
Burner flames are
uneven
l The burner ports are clogged. Clean with a straight pin
(see pages 34 and 35). If this fails, call for service.
Burner flames lift off
ports, are yellow, or are
noisy when turned off
Burner makes popping
noise when on
l The air/gas mixture is incorrect. Contact a service techni-
cian to check it.
l The burner is wet from washing. Let dry.
Control knob(s) will
not turn
l You are not pushing in before turning.
The Self-Cleaning cycle
l The clock does not show the correct time of day.
will not operate
l The Lock Lever is not all the way to the right.
l You have programmed a delayed start time. Wait for the
start time to be reached.
continued on next page
39
