If You Need Assistance Or
sewice
This section is designed to help you save the cost of a service call. First we outline possible problems,
their causes and their solutions. However, you may still need assistance or service. When calling our
Consumer Assistance Center for help or calling for service, you will need to provide a complete descrip-
tion of the problem, your appliance’s complete model and serial numbers
and
the purchase date. (See
page 2.) This information is needed to respond to your request properfy.
1. Before calling for assistance . . .
Petfomrance problems often resuft from file things you can find and fk without tools of any ldnd Please
check the chart below for problems you can fix. It could save you the cost of a service call.
PROBLEM
Nothing will
operate
POSSIBLE CAUSE
SOLLtTlON
The power cord is not plugged
Plug the power cord into a live circuit with
into a live circuit with proper
proper voltage. (See Installation Instruc-
voltage.
tions.)
A household fuse has blown or a
Replace household fuse or reset circuit
circuit breaker has tripped.
breaker.
The oven will
not operate
The Oven Selector is not turned
to BAKE or BROIL
A delayed start time has been
programmed.
The Oven Temperature Control
Knob is not turned to a
temperature setting.
The electronic MEALTIMER’
control is not set correctfy.
Turn the Oven Selector to the desired
setting.
Waft for the start time to be reached.
Turn the Oven Temperature Control Knob
to a temperature setting.
Set the MEALTIMER control correctly.
(See ‘Ylsing the electronic MEALTIMER-
control” on page 17.)
The surface
units will not
operate
Control knob(s)
will not turn
SeH-Cleaning
cycle will not
operate
A household fuse has blown or a
Replace household fuse or reset circuit
circuit breaker has tripped.
breaker.
The control knobs are not being
Push control knobs in before turning to a
set correctly.
setting.
You are not pushing in before
Push control knob(s) in before turning to a
turning.
setting.
.i
The Oven Selector and Oven
Set both the Oven Selector and Oven
Temperature Control Knob are
Temperature Control Knob to CLEAN.
not set to CLEAN.
-The range clock does not show
Reset clock to show the correct time of
the correct time of day.
day. (See page 12.)
The Lock Lever is not in the
CLEAN position-all the way to
Move Lock Lever all the way to the right.
the right.
A delayed start time has been
Wait for the start time to be reached.
programmed.
36
