Q. Push the Start/Enter pad. The Delay
Indicator Light will light up in the display to
indicate that the oven is programmed to
start at a later time. The Start Time and Stop
Time Indicator Lights wilLflash.
NOTE: You can change a time setting after
pushing the Stan/Enter pad without pushing
the Start/Enter pad again.
10. When the start time is reached, the Delay
Indicator Light will go off, a single tone will
sound and the display will count down the
bakingroasting time in minutes. The
example at rigM shows a baking/roasting
time of 30 minutes (the difference between
the stop and start times).
11. When the batinglroasting time is completed,
the oven will turn off automatically, beep
four times, and “End” will show in the
display. You will also hear two tones once
every minute until you push the Off/Cancel
pad.
NOTE: To disable the reminder tones, push
and hold the Timer Set pad for 4 seconds.To
reactivate the tones, repeat this procedure.
12. Turn both the Oven Selector and the Oven
Temperature Control Knob to OFF.
To cancel the MEALTIMER” control setting:
l
Push the Off/Cancel pad to return the display to
the time of day.
23
