6
IN USE/LOW BATT LED
• The IN USE/LOW BATT LED lights
when the Handset is on an active call.
• It flashes in cadence with an incoming
ring.
• It flashes quickly during programming
mode.
• It flashes slowly when battery is low.
PHONE / FLASH KEY
• Press the PHONE key to make a call.
• If you are currently on a call, pressing
PHONE flashes the line. This would
be used with call waiting to answer
your second call.
REDIAL / PAUSE KEY
• When you hear the dial tone, pressing
the REDIAL key will dial out the last
number that was called on your
phone.
• It can also be used to store the last
number dialed into the speed dial
memory. See Storing a Redial
Number into Speed Dial for details.
• You can store a PAUSE into your
dialing number. See Storing Pauses
in Memory for details.
TONE/ * KEY
• In PULSE dialing mode, this key is
used to switch to Temporary TONE
dialing mode.
Handset Features
IN USE/LOW BATT
PHONE/FLASH KEY
MEM/PROG KEY
CHAN KEY
OFF KEY
REDIAL/PAUSE KEY
VOLUME CONTROL
TONE/* KEY
VOLUME CONTROL
• Adjust the volume of what you hear
through the Handset.
• While on a call, press the or
key to adjust the listening volume. The
Handset will emit a double beep when
the maximum or minimum volume level
has been reached.
OFF KEY
• Press the OFF key to exit all modes
of operation.
CHAN KEY
• Pressing the CHAN key when the
Handset is in use will activate a
channel change to the next free
channel.
• This is used if you are experiencing
noise or interference on the current
channel.
MEM / PROG KEY
• Press the MEM key to enter memory
mode.
• The sequence for dialing a speed dial
number in memory is: PHONE, MEM,
Number Button (0-9).
• Press PROG key to enter programming
mode.
