SCANNING FROM THE PAPERPORT SOFTWARE 25
The 35mm negative mask also has a calibration slot. Do not place
items to be scanned in the calibration slot.
You’re now ready to scan the slide or negative.
To scan a 35mm slide or negative:
1. Start the PaperPort software and click the Scan icon on the toolbar.
The Scan Manager Pro appears.
2. Click the drop-down menu at the top of the Scan Manager Pro and
choose the type of transparency to scan.
Scan 35mm Using:—for a 35mm slide
Scan Negative Using:—for a 35mm negative
3. Click Preview to preview the image and adjust settings as needed.
Tip: You can also start the Scan Manager Pro from the scanner
buttons by setting a button to “Configure Before Scanning.” See
“Selecting New Options for the Buttons” on page 33.
Choose a transparency
scanning option:
Scan 35mm Using:
for 35mm slides
Scan Negative Using:
for negatives
