71
Recording
Playback
Introduction
Editing
Library
Function setup
Others
Locating a specific point by entering its elapsed time (Time Search)
1) Press T.SEARCH.
You may have to press repeatedly, depending on a disc. Press the button until
the following display appears.
e.g.
2) Press the number buttons and
/ to enter the desired time location on
the disc.
e.g. To enter 1 hour, 25 minutes, and 30 seconds
3) Press ENTER.
Notes
• Some discs may not respond to this process.
• Some scenes may not be accessed precisely as you specified.
• This method for accessing specific locations is available only within the current title of
the HDD or a DVD-RAM/R/RW/DVD video disc or within a current track of a VIDEO
CD/audio CD.
• Pressing CLEAR button resets the numbers.
001
00 00 00
::
Title
Search
Time
Locating by entering the number of a desired section
Normally titles, chapters, and tracks are numbered. By entering these
numbers, you can access a desired section.
1) Press T.SEARCH.
e.g.
2) Press
/ to select a section (title or chapter) you want to locate.
e.g.
3) Press the number buttons to enter a number of the section.
e.g. To enter 25, press “2”, then press “5”.
4) Press ENTER.
Notes
• Pressing CLEAR button resets the numbers. To clear the display, press T.SEARCH
button several times (depending on a disc).
• This method of locating a title is available only on a disc that contains title numbers.
• If a title is erased, the numbers of the following titles decrease respectively.
• When you record a new title (Original) on the HDD or a DVD-RAM disc, it is added
prior to current titles (Playlist), and each following title (Playlist) reference number will
advance by a factor of 1.
Title
Search
0001Chapter
001
0001
001
Title
Search
Chapter
If you are using a VIDEO
CD/audio CD, skip step 2.
When you want to
locate a chapter.
“0” → “1” → “ ” → “2” → “5” → “ ” → “3” → “0”
hour minute second
DVD-VIDEO
VCD CD
DVD-RDVD-RW
HDD
DVD-RAM
DVD-VIDEO
VCD CD
DVD-RDVD-RW
HDD
DVD-RAM
RD-XS35SU/SC_Ope_E_p066-071 06.1.17, 7:24 PM71
