68
Playback
Other playback functions
Pausing a TV broadcast to resume later (Pause TV)
This function enables you to pause a TV broadcast and resume viewing at a later, more convenient time,
by storing the TV broadcast temporarily on the HDD.
1
While viewing a TV broadcast via this recorder
or immediately before it starts, press TIMESLIP
.
When pause TV mode is ready, playback starts
automatically.
The recorder begins to store the broadcast on the HDD
the moment you press TIMESLIP button.
2
Locate a scene you want by the following
methods.
Fast-forward/fast-reverse:
Press PICTURE SEARCH button.
Forward/reverse Slow-motion:
Press SLOW button.
Forward/reverse frame by frame play:
First press PAUSE button then press FRAME button.
• To resume normal playback, press PLAY button.
• You can play in fast-forward to within 10 seconds prior to the
current broadcast.
3
Press TIMESLIP to exit this mode.
The recorder stops storing the broadcast on the HDD.
A message appears and asks you whether you will save
the stored data or erase it.
Press
/ buttons to select, then press ENTER button.
Notes
• This function is not available during recording.
• Pause TV recording stops when the HDD is filled up. It will not begin if the HDD has no remaining space.
• While using this pause TV recording, you cannot program a recording.
• Playback may jump a few seconds back or pause depending on the disc or data condition.
TIMESLIP
TIMESLIP
Start
HDD
RD-XS35SU/SC_Ope_E_p066-071 06.1.17, 9:36 PM68
