A SERVICE OF

logo

Replacement Procedures
Satellite U400/Satellite Pro U400/PORTEGE M800 Maintenance Manual 35
Install the display assembly
The following describes the procedure of installing the display assembly.
1. Insert the pole of hinge to the hole of hinge assembly, set the display assembly on
the base assembly.
2. Screw the hinges
M2.5×5.0B FLAT BIND screw x2
3. Connect the LCD harness to the connector on the system board.
4. Arrange the wireless antenna cables along the guide (front) and secure them with
guide.
5. Arrange the wireless LAN antenna along the guide and contact with the connector.
6. Install cover ASSY of the system.