A SERVICE OF

logo

Open as PDF
next previous
30
4.5.1 Schedule Setup (Sensor)
1. Recording – Toggles to the Recording Window (default).
2. Sensor – Toggles to the Sensor Window. This window allows you to create schedules for the sensors attached
to the DVR.
3. Day of the Week – Selects the day of the week for the schedule being made.
4. Single Selection Mode – Selects all days of the week at once.
5. Special Day Recording – Allows you to create special recording schedules for specific days.
6. Recording Schedule Window – Displays and allows you to edit the current Recording Schedule.
7. Enable/Disable – Enabled the selected Sensor for the time period specified.
8. Emergency Time – Specifies the amount of time (in seconds) to transmit the video in the Emergency Agent
Software.
9. Emergency IP – Specifies the IP Address to the send the Emergency Agent video to.
10. Event – Allows you to define Motion as an Alarm Event, whether to transfer the Alarm Event to the SMS Multi-
site Software, and/or whether to send the video to the Emergency Agent software.
Figure 4.5.1
2
1
6
7
4
5
8
9
10
Figure 4.5.1
KV-KLR Shown
3