GFI FAXmaker for Exchange/SMTP Manual Configuring Fax lines • 57
Screenshot 61 - FAXmaker Lines/Devices Configuration – Adding ISDN1B1 to the configuration.
4. The device/line properties dialog appears. Now select the ISDN
card that you are using in the ISDN type list box.
5. In the MSN/DID numbers list box you should add the number(s) to
be answered by GFI FAXmaker. You can enter either a full number
entry (i.e. 82733099) or a prefix number. An example of a prefix
number would be entering ‘827330’. In this scenario FAXmaker would
answer all numbers in the range ‘82733000-8273099’. Alternatively
click the Answer All button which will cause FAXmaker to answer all
incoming calls on the ISDN channel.
, If you do not enter any numbers, GFI FAXmaker will not
answer incoming calls!
6. If you plan to do DID routing on this channel, go to the advanced
tab and tick the ‘Number of DID/MSN digits to capture’ checkbox. The
number of digits should be set to the size of the range of numbers you
will be capturing. (i.e. For range of 0-99 you should capture two digits.
For a range of 0000-5000 would capture 4 digits).
7. You can configure Line options and Advanced options from the Line
options and Advanced tabs. A description of these options can be
found further on in this manual. Click OK to add the line.
8. You should then add any additional lines you wish to use with GFI
FAXmaker to the Lines/Devices configuration. An Eicon Diva Server
BRI-2M (1 ISDN line) should have 2 channels added to the
Lines/Devices configuration (ISDN1B1, ISDNB2). An Eicon Diva
Server 4BRI (4 ISDN Lines) should have 8 channels in the
configuration (ISD1NB1 – ISDN4B2).
