Chapter 8 Menus
94
8-3 Extended Menu
311 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH1
Select methods for setting the edit presets of the digital audio channels
CH1 to CH4 of this unit. Make these settings when using an editor (PVE-
500, BVE-600, etc.) or remote control unit without a function to control
digital audio edit presets.
The edit presets of the digital audio channels of this unit are turned on
and off according to the specified analog audio presets of the editor or
remote control unit.
nodef: No definition
ch 1: Follow the edit preset of analog channel 1.
ch 2: Follow the edit preset of analog channel 2.
ch1+2: Follow the edit preset of analog channel 1 or 2.
(The default settings for each item are as follows)
311: ch 1
312: ch 2
313: nodef
314: nodef
312 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH2
313 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH3
314 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH4
317 AUDIO EDIT MODE Select the type of transition for audio editing.
cut: Cut editing (Audio is discontinuous at edit points, and noise may
occur during playback.)
cross
: Cross-fade (Processing time 10ms)
320 DIGITAL AUDIO PB PROCESS ON
EDIT POINT
Select the treatment of audio playback at edit points.
cut: Carry out a cut (possibly resulting in audio discontinuities at the edit
point).
fade
: Fade out and fade in.
329 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH5
Select methods for setting the edit presets of the digital audio channels
CH5 to CH8 of this unit. Make these settings when using an editor (PVE-
500, BVE-600, etc.) or remote control unit without a function to control
digital audio edit presets.
The edit presets of the digital audio channels of this unit are turned on
and off according to the specified analog audio presets of the editor or
remote control unit.
nodef:
No definition
ch 1: Follow the edit preset of analog channel 1.
ch 2: Follow the edit preset of analog channel 2.
ch1+2: Follow the edit preset of analog channel 1 or 2.
330 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH6
331 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH7
332 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH8
335 OUTPUT REFERENCE SEL Select the reference signal of this unit.
ref
: Use the signal input to the REF.VIDEO IN connector as the
reference signal.
auto: According to the operation mode, automatically select either the
signal input to the REF.VIDEO IN connector or the input video signal
selected with the VIDEO INPUT SEL button as the reference signal.
For more details, see the following item “External synchronization to
reference signal generators” (page 95).
The input digital audio signals and video signals must be synchronized
with the reference signal input to the REF.VIDEO IN connector.
Menu items in the 300s, relating to editing operations
Item number Item name Settings
