
Chapter 8 Menus
92
8-3 Extended Menu
8-3 Extended Menu
8-3-1 Items in the Extended Menu
The extended menu contains the following items.
In the Settings column of the table, underlined values
indicate the factory default settings.
Menu items in the 100s, relating to the control panels
Item number Item name Settings
101 SELECTION FOR SEARCH DIAL
ENABLE
Select how the unit enters the shuttle, jog, or variable speed mode.
dial
: Press the SHUTTLE, JOG or VAR button or, except during
recording/editing, turn the jog dial or shuttle dial.
key: Press the SHUTTLE, JOG or VAR button.
105 REFERENCE SYSTEM ALARM Select whether or not to display a warning when the reference video
signal is not supplied or is out of phase with the input video signal.
off: No warning.
on
: Flash the STOP button as a warning.
107 REC INHIBIT LAMP FLASHING Select whether or not to flash the REC INH indicator when recording is
prevented (see REC INH (recording inhibited) indicator on page 24).
off
: Light the REC INH indicator.
on: Flash the REC INH indicator.
108 AUTO EE SELECT When a disc is inserted, select the operation modes in which input video
and audio signals are automatically handled in E-E mode.
S/F/R
: In STOP/F FWD (fast-forward)/F REV (fast-reverse) modes
stop: In STOP mode
off: Do not put the unit into E-E mode automatically.
109 FORCED EE WHEN DISC UNLOAD When “off” is selected in menu item 108, during disc loading/unloading
and when no disc is inserted, select whether or not to control the output
signal PB/EE setting.
on
: No control (the signal is always an E-E signal).
off: Control.
114 AUDIO MONITOR OUTPUT LEVEL Select whether or not to control the level of the audio signal output from
the AUDIO MONITOR OUT connector with the volume control knob for
the PHONES jack.
var: Control.
fixed
: Do not control.
118 KEY INHIBIT Select which buttons can be operated. The following sub-items control
different sets of buttons independently.
Sub-item
1 MON./INPUT SEL Select whether the AUDIO MONITOR SEL, the AUDIO METER SEL, the
AUDIO INPUT CH, and the VIDEO INPUT SEL buttons are enabled.
on: Disabled.
off
: Enabled.
2 CONTROL PANEL Select whether all buttons other than the buttons specified with sub-item
1 and the MENU button are enabled.
on: Disabled.
off
: Enabled.
119 VARIABLE SPEED LIMIT IN KEY
PANEL CONTROL
Select the playback speed range when carrying out playback in variable
speed mode from the control panel of this unit.
off
: –2 to +2 times normal speed.
on: 0 to +1 times normal speed.
130 DISPLAY DIMMER CONTROL Set the brightness of the audio level meters.
0 ... 6
...7: Set in this range. 0 is the brightest, and 7 the dimmest.