9
GB
Getting Started
Detaching the Table-Top Stand
from the TV
To detach the Table-Top Stand from the TV,
remove the screws fixed in step 3.
~
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• When removing the Table-Top Stand from the
TV, lay the display face down on a stable work
surface that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the
work surface.
• Be sure the TV is on the vertical position before
switching on. TV set must not powered on with
LCD panel face down to avoid uneven picture
uniformity.
2: Adjusting the viewing
angle of the TV
This TV can be adjusted within the angles as
illustrated.
Angle adjustment (Swivel)
~
• When adjusting the angle, hold the stand with one
hand to avoid having the stand slip or TV tip over.
Angle adjustment (Tilt)
~
• Be careful not to pinch your fingers between the
TV and stand when adjusting the angle.
~
• Ensure that there are no objects in front of the TV.
• Do not expose the Presence Sensor to direct
sunlight or other strong light, as malfunction may
occur.
20°
20°
20°
20°
0° - 6°
Presence Sensor
3D Sync Transmitter
IR Sensor
