25
Adjustment tips for the operating menu
Entering a name – “NAME”
Via the “NAME” menu, you can enter a freely selectable name for the radio
microphone. This name can be displayed on the standard display and can
consist of up to six characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
After you have changed to the setting mode of the “NAME” menu, the first
segment starts flashing on the display.
̈ The current frequency of the selected
channel is displayed. Change the frequency
by sliding the multi-function switch ¶ to the
position ̆ (UP) or ̄ (DOWN).
̈ Store your setting.
̈ Slide the multi-function switch ¶ to the
position ̆ (UP) or ̄ (DOWN) to select a
character.
(By sliding the switch only once, the next or
the previous character is displayed. If you
keep the switch slid, the characters change in
quick succession.)
̈ Press the multi-function switch ¶ (switch
position ț SET) to change to the next
segment.
̈ Have you entered the name completely?
Press the multi-function switch ¶ (switch
position ț SET) to store your setting.
“STORED” appears on the display panel ².
CH
MHz
SET
DOWN
UP
¶
