11-14
The main menu (shown above) includes two sections: Source Selection/ Picture
quality adjustments and Functional adjustments. Pressing MENU on the front panel
or on the remote control will bring up the main menu.
In the menu shown above, Composite video is selected as the current source. This
is indicated by an arrow to the left of ‘COMPOSITE’ in the menu. If S-video were
selected, for example, the arrow would then be to the left of ‘S-video’.
To select a source, there are two options. First, using the main menu, you can
highlight the desired source with the up or down arrows (front panel or remote),
then press enter. The Controller will immediately switch to the desired source. The
second option is to simply press the LEFT or RIGHT buttons on the remote or front
panel (see page 4) while there are no menus on screen.
Note:
There will be no on-screen display when the PASS-THROUGH is used. If you
are using the PASS-THROUGH and wish to change sources, simply press the
left or right buttons on the remote or front panel.
MENU DESCRIPTION AND NAVIGATION
Main Menu
