6-7
Random Access Adjustment Mode
Left-Right (east-west) Adjustments
Left-right and center adjustments affect only the vertical lines of the
projected image.
To start up the left-right and center adjustments, follow the next
procedure :
Push the control disc up or down to highlight LEFT-RIGHT (E/W)
on the geometry menu and then press ENTER.
Only the green image is displayed while making
left-right adjustments. The red and blue images
will automatically be corrected in the same
manner. Convergence corrections are automati-
cally disabled for the duration of these adjust-
ments.
The following adjustments can be executed
- vertical centerline bow
- vertical centerline skew
- side keystone (left - right)
- side bow (left - right)
All adjustments are indicated on the screen with
the function name, a bar scale and a number
between 0 and 100.
Adjust the next alignments until the vertical
lines are straight.
To enter an alignment, push the control disc up
or down to highlight a function and press
ENTER to activate this function.
Press EXIT to return.
<EXIT> to return.
<EXIT> to return.
<EXIT> to return.
the image.
image.
Corrects for curvature of the vertical lines on the right side.
Corrects the keystone geometry correction of the vert. lines
on the right side.
Corrects for curvature of the vertical lines on the left side.
Corrects the keystone geometry correction of the vert. lines
on the left side.
right.
the left.
EXIT returns to random access adjustment mode main menu.
