Message Explanation Recommended Action
Replace Print Cartridge The printer is out of toner. Replace the print cartridge.
See, p.93 "Replacing the Print
Cartridge".
Replace soon Print Cartridge The printer is almost out of
toner .
Prepare a new print cartridge.
Replace Transfer Roller It is time to replace the transfer
roller.
Contact your sales or service
representative.
Reset Tray 1 The indicated paper input tray 1
is not installed correctly, or not
installed.
Install the indicated paper input
tray 1 correctly.
Service call SCXXX There is a problem with the
printer's controller.
Turn off the main power, and
then turn it on again.
If the error occurs again,
contact your sales or service
representative.
Set Er: Prt Cart The indicated print cartridge is
not set correctly, or not set.
Set the indicated print cartridge
correctly.
The error message appears
even though the print cartridge
is set correctly.
Using a dry cloth, carefully
wipe the interface area on the
print cartridge surface.
Size Msmtch: # Start/JobReset The paper size setting in the tray
# (1, 2, bypass) differs from
that of actual paper si0ze in the
tray.
Load paper of the selected size
in the tray, and then press the
[Stop/Start] key to continue
printing.
Press the [Job Reset] key to
cancel printing.
TypeMsmtch: # Start/JobReset The paper type setting in the
tray # (1, 2, bypass) differs
from that of actual paper type in
the tray.
Load paper of the selected type
in the tray, and then press the
[Stop/Start] key to continue
printing.
Press the [Job Reset] key to
cancel printing.
Error & Status Messages on the Control Panel
105
