10. TROUBLESHOOTING
10-2
*
Line Failure
If communication is not successful, the LCD will show an error code
and an error report will be printed.
The format of the Error Report is as follows:
***
Error Report ***
AUG 18 ‘ 90 02:19 PM
********************************** ******************* *********************
●********
●MODE REMOTE TERMINALI.D.
START TIME
TIME
PAGES STATUS
●
●
————————————————————— .———————— ————— –———— .—————*
●
●
* TX
08/18 02:19 PM (X):06
**
Em5
●
●
●
****************** ● ***************** ● ***************** ● ****************** ●*********
10-3 Operating Difllculties
–
During Standby –
En!Ezl
is not displayed.
–During Transmission –
Transmission camot take
place.
.Switch the power on.
.The document is jammed in the
feeder. Remove thejam.med do-
cument (referto page 45) and repeat
the transmission procedure.
.The other machine is out of order
Check the error report.
Ask the other party to correct
the fault.
●The line is busy or noisy.
Check that the dial tone is sent out.
Check if there is an error report.
Try to retransmit.
●The telephone line type setting is
wrong. See page 31.
KO(M)KI”
