Specifying the Device Option
25
1
Output Tray
Specify the output tray.
outbin=value of output tray
Limitation
❒ Only installed output trays are available.
The following sample shows how to print from internal tray 1 (host name:
“nphost”; file name: “file1”):
• rsh
% rsh nphost print outbin=upper < file1
• rcp
% rcp file1 nphost:outbin=upper
• ftp
ftp> put file1 outbin=upper
Copies
Specify the number of copies.
copies=number of copies (1 to 999)
Limitation
❒ Do not specify “copies” and “qty
*1
” commands at the same time.
*1
“qty” is a collate function.
The following sample shows how to print 10 copies (host name: “nphost”; file
name: “file1”):
• rsh
% rsh nphost print copies=10 < file1
• rcp
% rcp file1 nphost:copies=10
• ftp
ftp> put file1 copies=10
Output tray Value
Internal tray 1 upper
Internal tray 2 inner
