A SERVICE OF

logo

35
CHANGING THE
DISPLAY CONTRAST
1. Press
MAN
.
2. Press
FUNC
then
9
.
Use Up/
Down
keys
to
set
con-
trast.
appears on the display.
3. Press
or
to select the desired
contrast.
4. Press
ENTER
to store the setting.
CLONING
PROGRAMMED DATA
FROM SCANNER TO
SCANNER
You can transfer the programmed
data to and from another RadioShack
Cat. No. 20-196 or Cat. No. 20-522
scanner using the supplied clone ca-
ble. To clone the data, follow these
steps.
1. Turn on both scanners.
2. Connect the supplied clone cable
to each scanner’s
PC/IF
jack.
CLONE MODE UP to send,
remove
cable
to
exit
appears.
3. Press
.
Confirm
send
data?
1=Yes
Press
other
key for
No.
appears.
4. Press
1
to send the data to the
other unit or press any other key
to cancel the operation.
The scanner sends the data. To exit
the clone mode, remove the cable.
20-196a.fm Page 35 Friday, June 2, 2000 3:48 PM