Talk Group ID – A simultaneous trunking transmission that identies
2-way radio users. This allows trunking systems to allocate a few
frequencies to multiple 2-way radio users.
Sub-bank – Each bank has an associated Talk Group ID sub-bank.
In Closed mode, the scanner only stops if a transmission has a Talk
Group ID saved in the associated Talk Group ID sub-bank. In Open
Mode, the scanner stops on all transmissions, except those you lock
out.
Appendix B: Search Banks
Note: All scanners tune by steps. Your RadioShack scanner uses steps
consistent with the latest US or worldwide standards. If you enter a non-valid
step frequency, any scanner will tune to the next step. Some scanner designs
do this without showing the correct step in the display. This scanner will
show the actual tuned frequency in the display. Because steps are so close
together, the audio quality will not be affected by the offset.
Search bank: SR0 Marine band
Receive mode: FM
Ch. Freq. (MHz) Ch. Freq. (MHz) Ch. Freq. (MHz)
01 156.0500 21 157.0500 72 156.6250
05 156.2500 22 157.1000 73 156.6750
06 156.3000 23 157.1500 74 156.7250
07 156.3500 24 157.2000
161.8000
77 156.8750
08 156.4000 25 157.2500
161.8500
78 156.9250
09 156.4500 26 157.3000
161.9000
79 156.9750
10 156.5000 27 157.3500
161.9500
80 157.0250
11 156.5500 28 157.4000
162.0000
81 157.0750
12 156.6000 63 156.1750 82 157.1250
