Setting for rear view camera (back
up camera)
CAUTION
Pioneer recommends the use of a camera
which outputs mirror reversed images, other-
wise screen image may appear reversed.
You can install a rear view camera onto the AV
input and display a rear view camera video.
When the gear shift is in REVERSE (R) posi-
tion, the video automatically switches to a rear
view camera video. (For more details, consult
your dealer.)
! After you set up the rear view camera set-
ting, move the gear shift in REVERSE (R)
and confirm if a rear view camera video
can be shown on the display.
! If the display should be switched to a rear
view camera video by error while you are
driving forward, change the rear view cam-
era setting.
! When you select CAMRA in V.IN, you can
select CAMRA.
1 Press FUNCTION to select CAMRA.
2 Press c or d to select an appropriate
setting.
! BAT – When the polarity of the connected
lead is positive while the gear shift is in RE-
VERSE (R) position
! GND – When the polarity of the connected
lead is negative while the gear shift is in
REVERSE (R) position
Setting the rear output and
subwoofer controller
This unit’s rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (R-SP FULL) or subwoofer
(R-SP S/W) connection. If you switch the rear
output setting to R-SP S/W, you can connect a
rear speaker lead directly to a subwoofer with-
out using an auxiliary amp.
1 Press FUNCTION to select R-SP.
2 Press a or b to switch the rear output
setting.
Pressing a or b will switch between
R-SP FULL (full-range speaker) and R-SP S/W
(subwoofer) and that status will be displayed.
# When no subwoofer is connected to the rear
output, select R-SP FULL.
# When a subwoofer is connected to the rear
output, set for subwoofer R-SP S/W.
Notes
! Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to Using subwoofer output on page
44).
! If you change this setting, subwoofer output
in the audio menu return to the factory set-
tings.
! Both rear speaker leads outputs and RCA rear
output are switched simultaneously in this
setting.
Switching the Ever Scroll
When Ever Scroll is set to ON, recorded text in-
formation scrolls continuously in the display.
Set to OFF if you prefer the information to
scroll just once.
1 Press FUNCTION to select E-SCRL.
2 Press a or b to turn E-SCRL on or off.
Setting the TV signal
When this unit is connected to a TV tuner, you
need to adjust the TV signal suitable to your
country TV signal setting.
Operating this unit
En
53
Section
03
Operating this unit
