English
8. SPECIFICATIONS
GS510-BL
GS510-CL
54 cm (21.3 inch), TFT Monochrome LCD panel
Anti-Glare Hard Coating 2H, Response Time : approx 50ms
LCD Panel
GS510-BLG
GS510-CLG
54 cm (21.3 inch), TFT Monochrome LCD panel
Hard Coating 3H, Response Time : approx 50ms
Viewing Angle
Horizontal: 170°, Vertical: 170° (CR≥10)
Dot Pitch 0.165 mm
Horizontal Scan Frequency
103.9 ± 4 kHz (only exclusive timing supported)
Vertical Scan Frequency
50.06 ± 3 Hz (only exclusive timing supported)
Resolution 5M pixels (Portrait: 2048 × 2560 dots (H × V))
Dot Clock (Max.) 142 ~ 152 MHz
Gray Scale 1024 steps of 8161 steps (10bit monochrome signal input)
Recommended Brightness 500 cd/m
2
(approx.70%)
Display Area 337.9 mm (H) × 422.4 mm (V) (13.3” (H) × 16.9” (V))
Power Supply
100-120/200-240 VAC±10%, 50/60 Hz, 0.9-0.7A /0.5-0.4A
Power Consumption Min. : 80 W
Max.: 85 W (With USB)
Power Saving Mode: Less than 7 W (for single signal input
without USB)
Main power off : 0 W
Input Connector DVI-D x 1
Input Signal TMDS (Single Link)
Plug & Play VESA DDC 2B / EDID structure 1.3
With stand
388 mm (W) × 512.5 mm ∼ 594.5 mm (H) × 208.5mm (D)
(15.3” (W) × 20.2” ∼ 23.4” (H) × 8.2” (D))
Dimensions
Without stand 388 mm (W) × 480 mm (H) × 85mm (D)
(15.3” (W) × 18.9” (H) × 3.35” (D))
With stand 9.3 kg (20.5 lbs.) Weight
Without stand 6.3 kg (13.9 lbs.)
Temperature
Operating: 0 °C ∼ 40 °C (32 °F ∼ 104 °F)
Storage: - 20 °C ∼ 60 °C (- 4 °F ∼ 140 °F)
Humidity 30 % to 80 % R.H. Non-condensing
Environment
Conditions
Pressure Operating: 700 to 1,060 hPa
Storage: 200 to 1,060 hPa
Standard USB Specification Revision 2.0
USB ports Upstream port × 1, Downstream port × 2
Communication
Speed
480 Mbps (high), 12 Mbps (full), 1.5 Mbps (low)
USB
Power Supply Downstream: 500 mA for each (Max.)
Classification of Equipment Type of protection against electric shock: Class I
EMC class: EN60601-1-2: 2001 Group 1 Class B
Classification of medical device (MDD 93/42/EEC): Class I
8. SPECIFICATIONS
27
