A SERVICE OF

logo

English
2. CABLE CONNECTIONS
NOTE
Be sure that the power switches of both the PC and the monitor are OFF.
Refer also to the PC user's manual when connecting the monitor.
1. Rotate the monitor ninety degrees counter-clockwise into the portrait
position.
2. Connect the signal cable to the DVI-D input connector on the rear of
the monitor and to the video output connector on the PC.
After connecting, secure the cable connectors with the attached screw-in fasteners.
Signal Cable
Connector on PC
PC
Signal cable
(FD-C39)
Video output connector Exclusive graphics board
(p.28)
NOTE
The monitor is not compatible with a color graphics board.
Power cord
Signal cable
FD-C39
12 2. CABLE CONNECTIONS