3. Aligning Part Coordinate System
No. 99MBA038A
3-5
No. Operation Screen display and remarks
4
Selecting the coordinate data input style
Press
.
Then, from the icon menu, press the numeric key
corresponding to
.
–
5
Measuring circle (A)
Measure circle (A) at three points.
(A)
<Remarks>
Follow the information displayed on the
screen to perform the measurement.
6
Measuring circle (B)
Measure circle (B) at three points.
(B)
<Remarks>
Follow the information displayed on the
screen to perform the measurement.
7
The part coordinate system is completed.
The part coordinate system is completed as shown below.
Origin
X
(A)
(B)
<Remarks>
Once the part coordinate system is
completed, coordinate values are
defined from the origin, which serves as
a reference.
