Table of contents
Quick Start
Transformer operations 4
TrainMaster Command Control operations 4
Conventional transformer operations
Conventional operations 5
Operating your locomotive set in the conventional environment 6
Locking your powered locomotive into a single direction 7
Coupling your locomotive in the conventional environment 8
RailSounds sound system operations
RailSounds sound system operations 9
Installing the battery 10
Using the RailSounds sound system in the conventional environment 11
Installing a Lionel Sound Activation Button for conventional operation 12
Using the RailSounds sound system in the TrainMaster Command Control environment 13
Odyssey System operations
Odyssey System operations 14
Activating the Odyssey System in the conventional environment 14
Turning off the Odyssey System in the conventional environment 15
Odyssey System Command Control operation 16
TrainMaster Command Control operations
TrainMaster Command Control operations 17
Operating your locomotive set in the Command Control environment 17
CAB-1 Remote Controller commands 18
CAB-1 Remote Controller numeric keypad commands 19
Tuning your locomotive’s performance 20-21
Assigning new ID#’s to your locomotives 22
Building a lash-up 23
Reprogramming your locomotives to restore features 24
Maintaining and servicing your locomotive
Adding fluid to your locomotives’ smoke generators 25
Lubricating your locomotive set 26
Replacing your locomotive set’s LEDs and lamps 27
Replacing the traction tires 27
Limited Warranty/Lionel Service 28
3
