Product Specifications
AC module
DC Input
Parameter Section Value
Power
Max. 295 W 300W 305W
Tolerance 3 % 3 % 3 %
Voltage
Open Circuit 39.7 V 39.8 V 40.0 V
Max. Power Point 31.8 V 32.0 V 32.1 V
Current
Short Circuit 9.85 A 9.98 A 10.10 A
Max. Power Point 9.28 A 9.40 A 9.52 A
Efciency
Relative Reduction < 2.0%
Note : *Relative efciency reduction in respect to irradiance
Note : Rated electrical characteristics are within 10 percent of above figures.
PV module was measured at STC (Standard Test Condition : Irradiation 1,000W/m2, Cell temp. 77°F(25°C), 1,5AM)
AC Output
Parameter Section 240VAC 208VAC
Power
AC Continuous
1)
280W (@DC Module 295W) / 285W (@DC Module
300W) / 290W (@DC Module 305W)
Inverter Rated Continuous 305W 300W
Voltage Rated 240V (211 ~ 264 V) 208V (187 ~ 229V)
Current
Rated 1.27A 1.44A
Max. Fault Current 77A
Efciency
Nominal 60 Hz (59.3 ~ 60.5 Hz)
Extended 57.0 Hz ~ 60.5 Hz
Power Factor > 0.95
CEC Weighted Efciency
(California Energy Commission)
96.5% 96.0%
Max. Number of AC Modules 12 ea 11ea
1)
Pmax (AC) = Max. Input DC Power x CEC Efciency
Protection
Ground Fault Detection and Interrupt (GFDI) Applied
Fuse 2A
CAUTION : FOR CONTINUED PROTECTION AGAINST THE RISK OF FIRE,
REPLACE ONLY WITH SAME TYPE AND RATING OF FUSE
Over Current Protection Device (OCPD) 20A
