INSTEON 2412N Manual

A SERVICE OF

next previous

17

®

Rev. 6/19/2012 11:45 AM

Character X10 House Code X10 Unit Code X10 Command

6 A 1 All lights off

E B 2 Status = off

2 C 3 On

A D 4 Preset dim level

1 E 5 All lights on

9 F 6 Hail acknowledgement

5 G 7 Brighten

D H 8 Status = on

7 I 9 Extended code

F J 10 Status request

3 K 11 Off

B L 12 Preset dim level

0 M 13 All devices off

8 N 14 Hail request

4 O 15 Dim

C P 16 Extended data (analog)

Create a macro by stringing many commands together on a single command line to perform several

actions with a single button press. Note that a command line can have a maximum of 44 characters

and you must insert a pause between each scene command and direct command.

Here are some great ways to incorporate macros:

• Activating several SmartLinc scenes at once from a single button press

• Adding X10 devices to an INSTEON scene

• Controlling devices not linked to SmartLinc via direct commands or setting them to different on-

levels

• Creating timers in increments of a second by adding pauses between On and Off commands.

Forexample,createa“TurnLightsonfor30Seconds”scenebyaddinga30-secondpause

(P9P9P9P3)betweentheOnandOffcommands.

Macros

1. Log onto http://smartlinc.smarthome.com and

click the Settings icon (wrench).

2. Click Open X10 Controller.

3. Set up your X10 devices:

•EnterthedesiredHouseCode.

•EnterthedesiredUnitCode.X10 address

will be sent (ex. A1).

•Clickthedesiredcommand.X10 command

will be sent (ex. On).

X10 Control Page