44
11
COMMANDMIC
®
HM-127
New2001
■ Call channel programming
q Push [CH/WX• U/I/C] several
times while pushing [H/L] to select
the desired channel group (USA,
INT, CAN) to be programmed.
w Push [16•
9] for 1 sec. to select call
channel of the selected channel
group.
•“CALL” and call channel number ap-
pear.
e Push [16•9] again for 3 sec. (until
a long beep changes to 2 short
beeps) to enter call channel pro-
gramming condition.
• The channel number and channel
group to be programmed blinks.
r Push [
YY
]/[
ZZ
] to select the desired
channel.
t Push [16•
9
] to program the dis-
played channel as call channel.
• The channel number and channel
group stop blinking.
■ Lock functions
The Lock function electronically locks keys and switches to
prevent accidental changes and function access from the mi-
crophone.
• All keys, switches and controllers on the transceiver are functional.
DD
Activating the Lock function
➥ While pushing [H/L], push
[SQL•
L] to turn the Lock
function ON or OFF.
•“ ” appears.
• Only [PWR], [PTT], [H/L],
[SQL• L
], [VOL]+[
YY
]/[
ZZ
]
and [SQL]+[
YY
]/[
ZZ
] are func-
tional.
DD
Activating the All key lock function
➥ While pushing [H/L], turn the
power ON by pushing [PWR]
to turn the All key lock function
ON or OFF.
•“ ” blinks.
• Only [PWR] and [PTT] are func-
tional.
MONI
MONI
DW
Appears when the lock
function is in use.
Blinks when the all lock
function is in use.
!IC-M402A_SA.qxd 03.11.11 2:52 PM Page 44 (1,1)
