33
9
CONNECTIONS AND MAINTENANCE
■ Supplied accessories
The following accessories are supplied: Qty.
q Mounting bracket ………………………………………… 1
w DC power cable (OPC-891) ……………………………… 1
e Microphone hanger ……………………………………… 1
r Knob bolts for mounting bracket ………………………… 2
t Screws for mounting bracket (5 × 20) ………………… 2
y Mic hanger screws (3 × 16) ……………………………… 2
u Flat washers for mounting bracket (M5) ……………… 2
i Spring washers for mounting bracket (M5) …………… 2
o RCA connector cable (OPC-1278) ................................. 1
!0 Warning sticker …………………………………………… 1
■ Antenna
A key element in the performance of any communication sys-
tem is the antenna. Ask your dealer about antennas and the
best place to mount them.
■ Fuse replacement
One fuse is installed in the supplied DC power cable. If a fuse
blows or the transceiver stops functioning, track down the
source of the problem, if possible, and replace the damaged
fuse with a new, rated one.
■ Cleaning
If the transceiver becomes dusty or dirty, wipe it clean with a
soft, dry cloth.
AVOID the use of solvents such as benzene or al-
cohol, as they may damage transceiver surfaces.
8
9
!IC-M402A_SA.qxd 03.11.11 2:52 PM Page 33 (1,1)
