1918
Versa-Tether
®
Versa-Tether
®
WARNING:
ATTACH THE VERSA-TETHER ONLY TO TETHER
ANCHORS IDENTIFIED BY YOUR VEHICLE MANUFACTURER AS
TETHER ANCHORAGE POINTS. USE OF OTHER LOCATIONS IS
NOT APPROVED OR PERMITTED.
• ALWAYS USE THE VERSA-TETHER FOR CHILDREN
WEIGHING MORE THAN 50 POUNDS (22.6 KG).
•
Britax
®
recommends that the tether be used at all times. Using
the tether will improve the stability of your child restraint and
reduce the risk of injury.
•
If your vehicle does not currently have a tether anchor
attachment, refer to your vehicle owner’s manual or contact
your vehicle manufacturer for assistance.
If a tether anchor is
not available, DO NOT modify your vehicle without advice from
your vehicle manufacturer.
Using the Versa-Tether
1 Locate the tether
on the back of the
restraint.
2 Once your child
restraint is secured
with the vehicle
belts or LATCH, lift
the tether adjuster
tab to release the
tether straps, then
pull to fully extend
tether.
3 Locate the hook on the strap.
4
Hook the tether to an anchor point (
Fig. A
).
5
Pull the tether adjuster belt to remove all slack.
6
Verify that there is tension in the tether strap and that the child
restraint is properly secured.
A
