7 - 7
Data
The Data tab controls when data is transferred between the Thor VM1 and the Mobile Device Server.
Contact On Startup – Connect to the Mobile Device Server when the Enabler is accessed.
On Resume – Connect to the Mobile Device Server when resuming from Suspend
mode.
On IP Change – Connect to the Mobile Device Server when the IP address of the Thor
VM1 changes.
On Ext. Power – Initiate connection to the Mobile Device Server when the device is
connected to an external power source, such as based on a docking event.
Contact Periodically / Period-
ic Update
Allows the administrator to configure the Enabler to contact the Mobile Device Server
and query for updates at a regular interval beginning at a specific time.
Wakeup device if suspended If the time interval for periodic contact with the Mobile Device Server occurs, a mobile
device that is in Suspend Mode can wakeup and process updates.
Reboot before attempt Reboot mobile device before attempting to contact Mobile Device Server.
Require external power Only connect when the mobile device has external power.
Use relative offset Dimmed.
Network When checked, the LAN/Wi-Fi network is enabled to transfer statistics.
Report Specifies the Report Interval, how frequently the Enabler reports statistics to the Mobile Device
Server.
Retransmit After
Server Contact
Specifies if the device sends statistics to the Mobile Device Server immediately following a con-
nection to the server.
Restrict Band-
width to User Idle
Time
When enabled, periodic updates from the Mobile Device Server are postponed until the Thor VM1
has been idle for the specified period of time. The default is disabled.
Idle timeout Specify the length of time the device must be idle before a periodic update can run, used when
the parameter above is enabled.
