A SERVICE OF

logo

Installation Instructions
69-2157EFS—05 16
TheDUSKcontroldetermineshowdarkitneedstobebeforedetectedmovementwill
trigger the controlled lights and can be set as follows:
2) TurntheDUSKcontrolknobtothe
setting and wait until darkness falls.
3) Whentheambientlightlevelreachesthelevelatwhichyouwishthelightsto
turnon(i.e.atdusk),SLOWLYturnthecontrolinaclockwisedirectiontowards
the
markuntilmovementcausesthelight(s)toilluminate.Leavethecontrol
set at this point.
4) Themotiondetectorwillbecomeoperativeatapproximatelythesamelevelof
darkness each evening. Observe the operation of the unit over several nights to
ensure it is set as required and adjust as necessary. If the unit activates too early
(i.e.whenitistoolight),turnthecontrolslightlytowardsthe
mark. If the unit
activatestoolate(i.e.whenitistoodark),turnthecontrolslightlytowardsthe
mark.
69-2157EFS_C.indd 16 9/22/2008 11:54:04 AM