15
2. Read command (Note: 1 to 7 and SUM need to be transformed into ASCII code)
1 2 3 4 5 6 7
Item STX
STATUS ID NO.
AREA
ADDRESS
RELATIVE
NO.
DATA
ETX SUM
MODE 02 00 FF 81 04 00 00 00 03 21
TRIGGER
POLARITY 02 00 FF 81 0F 00 00 00 03 10
PRESET 02 00 FF 81 08 00 00 00 03 1D
SHUTTER SPEED
VARIABLE VALUE 02 00 FF 81 11 00 00 00 03 23
CONFIGURATION 02 00 FF 81 12 00 00 00 03 22
DATA BIT 02 00 FF 81 14 00 00 00 03 20
VD / FVAL 02 00 FF 81 15 00 00 00 03 1F
HD / LVAL 02 00 FF 81 16 00 00 00 03 1E
GAIN 02 00 FF 81 0C 00 00 00 03 12
BLACK LEVEL 02 00 FF 81 17 00 00 00 03 1D
VERTICAL 2 PIXEL ADDITION (*1) 02 00 FF 81 13 00 00 00 03 21
MODE 02 00 FF 81 1E 00 00 00 03 0F
START 02 00 FF 81 1F 00 00 00 03 0E
PARTIAL SCAN
WIDTH 02 00 FF 81 20 00 00 00 03 23
(*1) VERTICAL 2 PIXEL ADDITION is only for KP-F500PCL/SCL.
Read data from Slave is based on 4. (2).
