Printing on envelopes
NOTE If you are printing one or just a few envelopes, you can use the front manual feed
slot. See
Printing with the front or rear manual feed slot.
Avoid using envelopes that have clasps or windows; have thick, irregular, or curled edges; are
shiny or embossed; or are wrinkled, torn, or otherwise damaged.
1 Raise the output tray and remove any media from the input tray.
2 Insert up to 15 envelopes along the right side of the input tray, with the flaps facing up and to the
right, until they stop.
3 Press the button on top of the paper width guide and slide the guide to the right until it stops at
the edge of the envelopes.
4 Press the input tray lock and retract the tray until it stops at the edge of the envelopes.
5 Lower the output tray.
6 For Windows:
a Open the printer driver (see Printing a document).
b Click the Paper/Quality tab.
c Select the envelope size from the Size is drop-down list.
d Change any other desired print settings and click OK.
e Print your file.
For Macintosh:
a Click File, and then click Page Setup.
b Select the envelope size and click OK.
Printing on envelopes 53
