A SERVICE OF

logo

Chapter 2 Printing Tasks 93
Selecting the Input Tray
1 Slide Tray 4 open until it stops.
2 Pull the front guide out by the blue pin. Place
the guide into the slots in the top and bottom
of the input tray that correspond to the paper
size you are loading and push in the pin.
3 Repeat step 2 to adjust the back guide.
4 Repeat step 2 to adjust the left guide.
Note
To load 11 x 17 inch paper, move the left guide to
the back of the tray.
Continued on next page.
1
2
3
4