Controls and Features
Beverage Center
Remove
packaging
Before using, be sure all packing materials
and tape have been removed.
If you are discarding an old refrigerator,
remove the doors to reduce the danger of
children being trapped inside.
Interior light
and switch
The interior light makes it easy to view
your beverage labels and enhances the
display of your collection.
When the switch is in the OFF position,
the light comes on only when the door is
opened. Remember to turn off the light
when it is no longer needed.
Temperature
control
The temperature range of the beverage
center is from the mid thirties to the
upper forties.
Do not install the beverage center where
the temperature will go below 55°F (13°C)
or above 90°F (32°C).
As with any refrigeration product, there is
a slight temperature variance at different
locations within the cabinet.
The coolest area will be in the lower part
of the cabinet.
The cooler area will be in the middle
section.
The upper part of the cabinet is the
warmest section.
To set the control, turn it to the midpoint
setting (approximately 45ºF). Once the
beverage center is loaded, allow at least
24 hours before making any adjustments
to the initial setting.
9
