Cooting
by~me
Time Cook I &II allows you to
Step 5:
When time is up, the oven
microwave for a preset amount of
signals and flashes
“End~’
Oven,
time
using automatic power level
light
and fan shut off.
10 (High)~or change power level
-
automatically.
Step 6:
Open the door.
Power level 10 (High) is
recommended for most cooking,
Using the
~me
Cook II
but you may change this for mole
Feature
flexibility. See
th;cookbook.
To become better acquainted with
The Time Cook II feature lets you
time cooking, make a cup of coffee
set two time cooking functions
by following the steps below.
within one program. This is ideal
if you want to change power levels
Step 1:
Fill a cup 2/3 full of
water, add 1 teaspoon of instant
coffee and stir to dissolve. Use a
cup that has no metal decoration
and is microwave-safe (refer to
Microwaving Tips on page 3).
Place cup in oven and close door.
Step 2: Touch TIME COOK I & II.
Display shows “:
O“ and “POWER
101’
“ENTER COOK
~E
I“ flashes.
Step
3: Select your time. Touch
1 and
MIN pad for one minute.
Display shows
“1:00”
and “POWER
10~’
“COOK TIME I“ flashes.
Because automatic power level 10
is recommended for this cup of
coffee, there is no need to change
during your cooking operations.
Here’s how to do it.
Step
7: “POWER 10” is displayed
and “COOK TIME I“ counts down,
Step 8: At the end of “COOK
TIME
I:’
the second power level is
displayed and “COOK TIME II”
is shown counting down.
Step
9: When time is up, the oven
signals and flashes
“End?’
The
oven, light and fan shut off.
Step 10:
Open the door.
Cook ‘N Watch
Step 1:
Place food in oven in
The Cook ‘N Watch feature is a
microwave-safe container and close
short-term cooking program which
the door.
automatically turns the oven off
after 3 minutes. It’s ideal for
the power level. (If power level
-
10
is not appropriate, see “How to
Change Power Level” at right.)
Step
4: Touch START. “COOK
TIME
1;’
“POWER 10” and time
counting down show on display.
L
Step 2: Touch TIME COOK I & II.
Display shows “:
O“ and “POWER
10~’
“ENTER COOK
ME
I“ flashes.
Step 3: Select your cooking time.
For example, touch 2, 1 and 5 for
two minutes and 15 seconds.
Display shows
“2:E”
and “POWER
10~’
“COOK TIME I“ flashes.
Step 4: Touch TIME COOK I & II.
Step 5: Set your cooking time.
How
to Change
Wwer
kvel
After setting cooking time,
touch POWER LEVEL pad,
then touch desired number for
new power level.
melting cheese on food or other
quick cooking operations where
you want to stop cooking at just
the right time.
To Use Cook ‘N Watch
Step 1:
Touch COOK ‘N WATCH.
After 4 seconds, “START” flashes
on display.
Step
2: Touch START. “COOK ‘N
WA~H”
and time counting up to 3
minutes are displayed. Power level
10 is automatically set in oven but
another power level can be selected
either during programming or
during cooking.
Step
3: Open the door or touch the
CLEAR/OFF pad to stop cooking.
The oven will automatically signal,
flash “End” and shut off at the end
of 3 minutes.
Step
6: Touch START.
10
