A SERVICE OF

logo

INSTALLATION INSTRUCTIONS M2488 PRODUCT GUIDE
1-10 CG00000-011503 REV. A April 1997
1-6.3 Cable and Power Connections
Installation of the SCSI cables and power cord are described in the following paragraphs. The SCSI
connectors are described in the User’s Guide, Chapter 1.
** NOTE **
1. Cable and power connections should only be made upon comple-
tion of the M2488 hardware setup to include attachment of optional
equipment. Use the appropriate assembly procedures for the desired
option.
2. Both SCSI connectors on the IPM must be connected. The con-
nection may be either two SCSI cables or one SCSI cable and one
Terminator.
See Figure 1-2.
Figure 1-2. Cable and Power Connections
STEP ACTION
1 Attach SCSI cable to one of the SCSI connectors on the IPM (which of the two
connectors is not important).
2 Attach the Terminator or the second SCSI cable to the other SCSI connector
on the IPM.
3 Connect power cord.