ASSEMBLY
OM 0370SB1388-A 13
Installation of Three Point Hitch
(Figure 3)
1. Attach the lower hitches (item 1) to the
snowblower placing two reinforcement plates
(item 2) under the lower hitches and secure
with four 3/4"NC x 5" bolts (item 19), two
3/4"NC x 5 1/2" bolts (item 3), 3/4"
lockwashers and 3/4" nylon insert locknuts
(items 4-5).
2. Attach the hitches (items 6-7) to the lower
hitches (item 1) as illustrated and secure with
two 7/8" NC x 2 1/2" bolts and 7/8" stover nuts
(items 8-9).
3. Fasten each hitch (items 6-7) to the upper
hitch (item 10) using a 7/8" NC x 6" bolt and a
7/8" stover nut (items 11-12).
4. Attach the upper hitch (item 10) to the
snowblower as illustrated using a 7/8" NC x
4 1/2" bolt and a 7/8" stover nut (items 13-14).
5. Install the brace (item 15) on the lower hitches
(item 1) by inserting two 3/4"NC x 4 1/2" bolts
(item 16) in hitches closest holes and secure
with lockwashers and nylon insert locknuts
(items 17-18).
6. Install the eyebolt (item 20) in the upper hole of
the left or right side of the three point hitch by
screwing the eyebolt nut to the top and locking
eyebolt in place with a 3/8" serrated flange nut
(item 21).
Figure 3
