15WPMAN0141 (8/31/01)
Driveshaft Lubrication
Lubricate the driveshaft slip joint every 8 operating
hours. Failure to maintain proper lubrication could
result in damage to U-joints, gearbox and driveshaft.
Lower mower to ground.
Apply grease at location as shown in Figure 8.
Raise and lower mower several times to distribute
grease.
CD3536D
7
NORMAL
FLUID
RANGE
1
2
4
9
3
8
9
8
5
6
10
11
Ref No Description Frequency
1 Front U-Joint 8 hours
2 S lip Joint (1 location on shaft, access through slot) 8 hours
3 Rear U-Joint 8 hours
4 Right Spindle (Access through slot) 24 hours
5 Center Spindle (Access through slot) 24 hours
6 Left Spindle (Access through end of shield) 24 hours
7 Gearbox (Fill to center of horizontal shaft with Check
SAE 90W gear lube) Daily
8 Caster Wheel (Right and Left) 8 hours
9 Caster Pivot (Right and Left) 8 hours
10 F ront Caster Wheel Pivot (Right and Left) 8 hours
11 Front Caster Wheel (Right and Left) 8 hours
Figure 8. Lubrication Points
